• 4.5" H x 4.5" W x 2" D.
• Cast pewter base.
  
• 14K gold finish.
  
• Hand-enameled detailing.
  
• Hand-set with Swarovski® stones.
  
• Battery included.
• Signature Jay Strongwater box.

How to set the time and replace the battery in your Jay Strongwater clock

Time Setting

Note: Your clock may come with a tiny plastic fork acting as a spacer to keep the crown at a pushed out position. This fork stops the clock from running thus conserving battery power. To activate the clock, pull out the fork before doing the time setting procedure as described below.

The time setting crown is located behind the bezel at the position of 3 o'clock. To set the time, push out the crown and turn it until the hands show the current time. Push crown back in the normal position to restart clock.

Battery Replacement

When the clock loses time or stops, the battery is due for replacement. The battery is accessible from the backside of the clock. Insert a screwdriver or a blade into the case notch at the side of the back cover and pry open the back cover. The battery is retained in position by a tiny metal plate. Move the plate counter-clockwise to remove battery.

Battery type

SR626SW, UCC377, Ray-O-Vac RW329 or equivalent